The SIMPLE commmand in bpqcfg.txt sets defaults for all parameters except NODECALL
The values set are:
AUTOSAVE = 1 BBS = 1 BTINTERVAL = 60 BUFFERS = 999 C = 1 DESQVIEW = 0 EMSFLAG = 0 FULLCTEXT = 0 HIDENODES = 0 HOSTINTERRUPT = 127 IDINTERVAL = 10 IDLETIME = 900 IP = 0 L3TIMETOLIVE = 25 L4DELAY = 10 L4RETRIES = 3 L4TIMEOUT = 60 L4WINDOW = 4 LINKEDFLAG = 'A' MAXCIRCUITS = 128 MAXNODES = 250 MAXHOPS = 4 MAXLINKS = 64 MAXROUTES = 64 MAXRTT = 90 MINQUAL = 150 NODE = 1 NODESINTERVAL = 30 OBSINIT = 6 OBSMIN = 5 PACLEN = 236 T3 = 180 TRANSDELAY = 1
IDMSG INFOMSG BTEXT CTEXT and ROUTES are set to empty strings.
As a minimum you must specify NODECALL and at least one PORT, and APPLICATIONS and APPL1CALL if you want to host an application.
For example, the following is a basic config for using Airmail via a WINMOR port
SIMPLE ; Set defaults for all parameters. NODECALL=GM8BPQ-2 ; NODE CALLSIGN INFOMSG: WINMOR/Airmail Gateway Mapperley, Nottingham. *** CTEXT: Welcome to G8BPQ's WINMOR/Airmail System *** PORT ID=WINMOR Port 1 TYPE=EXTERNAL PROTOCOL=WINMOR DRIVER=WINMOR QUALITY=0 ENDPORT APPLICATIONS=AIRMAIL APPL1CALL=GM8BPQ
John Wiseman G8BPQ
March 2010